 | 100L - AC
bracket for driver side mounting. Uses intake manifold and water pump bolts. Use
with 200R Alternator bracket. Will clear tall valve covers. dimensions buy |
| 100R - AC
bracket for the passenger side. Uses intake manifold and water pump bolts. Will clear tall
valve covers. Use with 200 L Altenator bracket. dimensions buy |
| 102R - AC
bracket for passenger side mounting. For use with dual carb manifold, and similar
applications Use with 202L Alternator bracket. Will clear tall valve covers. dimensions |
| 128R - AC
bracket for passenger side mounting. Extra clearance for carburetion and injection
systems. Designed for use with aluminum heads. Can be used with iron heads by
drilling and tapping one hole. Use with 228L Alternator bracket. Will clear 3"
tall center bolt valve covers and 3 3/4" valve covers with earlier heads..Use with
228L Alternator bracket. dimensions |
| 129R - AC
bracket for driver side mounting. Especially designed for VORTEC heads. Uses
intake manifold and water pump bolts. Use with 228L Alternator bracket. Will clear tall
valve covers. Use with 228L Alternator bracket. dimensions |
| 112R - AC
bracket for passenger side mounting. Extra clearance for carburetion and injection
systems. Designed for use with aluminum heads. Can be used with iron heads by
drilling and tapping one hole. Use with 228L Alternator bracket. Will clear 3
3/4" tall center bolt valve covers and 4 1/2" valve covers with earlier
heads..Use with 212L Alternator bracket. dimensions |
| 132R -
The very wide stance of these brackets allow very low hood mounting for vehicles with the
horizontal space. This bracket fits all GM aluminum heads and most iron heads.
Some iron heads will require drilling and tapping one hole. Can be used with
Corvetts and Camaros. Use with 232L Alternator bracket. dimensions |
| 133R -
Like the 132R above but designed for VORTEC heads.Use with 232L Alternator bracket.
Use with 213L Alternator bracket. dimensions buy |
| 113R
- AC compressor bracket for passenger side mount. A wide stance bracket for low hood
applicaitons. Unlike the 132R no holes are required in the head. The
bracket does use the third exhaust bolt hole. Use with 213L Alternator bracket. buy
dimensions |
| 113L
-AC compressor bracket for driver side mount. A wide stance bracket for low hood
applicaitons. Unlike the 132R no holes are required in the head. The
bracket does use the third exhaust bolt hole. Use with 213R Alternator bracket. dimensions |
| 113R low
- This bracket is like the 113 above but 1" lower. The design is like the 132
above but no holes are required in the head. However the bracket does use the third
exhaust hole. Use with 213L low Alternator bracket. dimensions |
| 113L low
- AC compressor bracket for driver side mount. A wide stance bracket for extra low
hood applicaitons. Unlike the 132R no holes are required in the head.
The bracket does use the third exhaust bolt hole. Use with 213R low Alternator
bracket. dimensions |
| 113R SC
- Brackets especially for front motor mount installations, such as the 1955 through the
1962 Corvette. Low profile like 113R low. Use with 213L SC Alternator bracket.
dimensions |
| 113L SC
- Like 113R SC but driver side mount. Use with 213R SC Alternator bracket. dimensions |
| 106R
AC bracket to mount the AC compressor below the crank centerline on the passenger
side. Bolts to fuel pump holes requiring a remote fuel pump. dimensions |
| 109R
Like 106R above but mounted higher and wider for more ground clearance. dimensions |
| 200R Alternator bracket
for driver side mounting. Uses intake manifold and water pump bolts. Use with 100L
Alternator bracket. Will clear tall valve covers. Use with 100L AC bracket. dimensions |
| 200L Alternator bracket
passenger side, Like 200R above but for use with air conditioned vehicles. Use with
100R AC bracket. Use with 100R A.C. bracket. buy
dimensions |
| 202L -
Alternator bracket for driver side mounting. For use with dual carb manifold, and
similar applications Use with 102R A.C. bracket. Will clear tall valve covers. dimensions |
| 228L -
Alternator bracket for driver side mounting. Extra clearance for carburetion and
injection systems. Designed for use with aluminum heads. Can be used with iron
heads by drilling and tapping one hole. Use with 128R Alternator bracket. Will clear
3" tall center bolt valve covers and 3 3/4" valve covers with earlier heads..Use
with 128R A.C. bracket. dimensions |
| 229L -
Alternator bracket for driver side mounting. Especially designed for VORTEC
heads. Uses intake manifold and water pump bolts. Use with 228L Alternator bracket.
Will clear tall valve covers. Use with 128R A.C. bracket. dimensions |
| 212L -
Alternator bracket for driver side mounting. Extra clearance for carburetion and
injection systems. Designed for use with aluminum heads. Can be used with iron
heads by drilling and tapping one hole. Use with 128R Alternator bracket. Will clear
3 3/4" tall center bolt valve covers and 4 1/2" valve covers with earlier
heads..Use with 112R A.C. bracket. dimensions |
| 232L -
Alternator bracket for low profile applications. The very wide stance of these brackets
allow very low hood mounting for vehicles with the horizontal space. This bracket
fits all GM aluminum heads and most iron heads. Some iron heads will require
drilling and tapping one hole. Can be used with Corvetts and Camaros. Use with 132R
A.C. bracket. dimensions |
| 213L
- Like the 232R above but no holes are required in the head. However the bracket
does use the third exhaust bolt hole.Alternator bracket. Use with 213L Alternator bracket.
dimensions buy |
| 213R -
Like the 232L but driver side mout. Use with 113L A.C. bracket. dimensions |
| 213L low
- This bracket is like the 113 above but 1" lower. The design is like the 132
above but no holes are required in the head. However the bracket does use the third
exhaust hole. Use with 113R low A.C. bracket. dimensions |
| 213R low
- Like the 213L low but driver side mout. Use with 113L low A.C. bracket. dimensions |
| 213L SC
- Brackets especially for front motor mount installations, such as the 1955 through the
1962 Corvette. Low profile like 213L low. Use with 113R SC A.C. bracket. |
| 213R SC
- Like 213L SC but passenger side mount. Use with 113L SC A.C. bracket. dimensions |
| 206L
Alternator bracket to mount the alternator low on the drivers side of the engine.
Also see the 207L for tight frame rail applications. dimensions |
| 211R
Alternator bracket to mount the alternator low on the passenger side of the
vehicle. Requires use of remote fuel pump. dimensions |
| 209L
Alternator bracket to use the GM CS130 alternator with the mounting ear in the 2
o'clock postion. dimensions |
| 207L
Alternator bracket to mount the alternator low on the drivers side of the engine.
Like the 206L but mounts the alternator lower and closer to centerline of the engine to
allow for tight frame rails. dimensions |
